Skip to main content

SimMan Critical Care

Cleaning the arm IM pads & absorbent sheets

The arm IM pad can be punctured numerous times before being replaced or dried. It can withstand up to 5 x 2 ml injections before needing replaced with a dry pad.

  1. Unzip the arm skin from shoulder to wrist.

  2. Remove the arm IM pad.

  3. Wring out the fluid from the pad.

  4. Completely air dry (approximately 12 hours).

  5. Lift out the IO arm bone.

  6. Remove absorbent sheet, if wet.

    SM_Arm_IM_Pads_Absorbent_Sheets_01.svg

  7. Discard the used sheet.

  8. Select the new sheet.

  9. Insert the sheet into place.

  10. Replace the arm IO bone.

  11. Ensure the base of the IO bone slots into place.

  12. Place the IM pad back inside the shoulder.

    SM_Arm_IM_Pads_Absorbent_Sheets_02.svg

Video.ai How-to video: How to Replace Consumables Arm.