Filling the fluids internal tank
Ensure the Patient Simulator power is on.
Roll the right leg skin down to expose the fill panel. Lift the panel cover.
Connect the fluid fill bottle tubes to the relevant inlet and the air outlet in the right leg panel.
Turn on the Activate Filling. The button will light up and blood will flow into the Patient Simulator.
When the flow stops, disconnect the fill bottle.
Turn off the Activate Filling.
NOTES
Disconnect tubes from the Patient Simulator before turning off the Activate Fill button. Turning the fill button off before disconnecting the tubes will initiate draining of the tank.
Only one tank can be filled at a time.