Battery storage and transport
Store in a refrigerator i.e. temperature 0°C - 4°C (32°F - 40°F).
The two simulator batteries can be transported in the Patient Simulator during air freight. When transporting spare batteries contact the airline or freight company for the latest transport regulations.
WARNINGS
The suitcases are heavy. Always ensure that they are firmly secured during transportation and storage so as not to cause personal injury or damage to the product.
When unpacking the torso, do not use the leg openings as lifting points, use the genitalia opening! The slides might come loose and cause personal injury or product damage.
CAUTIONS
Do not store this product outside the storage conditions specified in the Important Product Information.
Store simulator in a clean, dry area. Storage in a damp area will cause corrosion of electronic parts.
Do not store the Patient Simulator with fluid.
Do not store the Patient Simulator with wet injection pads.
Do not store the Patient Simulator with tape or other adhesive products attached to the skin.
Patient Simulator should be stored on its back with adult cervical collar in place.
Do not stack Patient Simulators or store with heavy objects on top.
The Patient Simulator’s neck should be supported at all times during transport.
Do not try to lift the Patient Simulator alone, unless this is part of a simulation where correct lifting techniques shall be demonstrated.
Lifting the Patient Simulator alone may lead to muscle strains.
Ensure that the Patient Simulator is properly secured during transportation to prevent personal injury or damage to the product.
Always keep the thumb lock pins inserted in the hip joint (leg) connections. The pins could wrap around internal cables and tubes, risking damage.